Send inquiry
slow close damper soft close toilet seat damper,TRD-N1-18 Series damperSpecification ModelMax.torqueReverse torquedirectionTRD-N1-18-R1031 N·m (10kgf·cm)0.2 N·m (2kgf·cm)ClockwiseTRD-N1-18-L103Counter-clockwiseTRD-N1-18-R1531.5 N·m (15kgf·cm)0.3N·m (3kgf·cm)ClockwiseTRD-N1-18-L153Counter-clockwiseTRD-N1-18-R2032 N·m (20kgf·cm)0.4 N·m (4kgf·cm)ClockwiseTRD-N1-18-L203Counter-clockwiseTRD-N1-18-R2532.5 N·m (25kgf·cm)0.6 N·m (6kgf·cm)ClockwiseTRD-N1-18-L253Counter-clockwiseFeatures: 100% performance test Environment test Oil leakage test Lifecycle test>50000 times ISO9001:2008 ROHS directiveNote) Measured at 23°C±2°C *Max. angle 110° *Operating temperature –5~50°C *Weight 12±1g Body and cap material Polybutylene terephthalate (PBT) Rotating shaft material Polyphenylene Sulphide (PPS) *Oil type Silicone oilSize:How to use the damper:1.TRD-N1-18 is designed to generate a large torque just before a?lid closing from a vertical position, as shown in Diagram A, comes to a full closure. When a lid is closed from a horizontal position, as shown in Diagram B, a strong torque is generated just before the lid is fully closed, causing the lid to not close properly.2.When using a damper on a lid, such as the one shown in the diagram, use the following selection calculation to determine the damper torque.Example) Lid mass M : 1.5 kg Lid dimensions L : 0.4m Load torque : T=1.5X0.4X9.8÷2 =2.94N·m Based on the above calculation, TRD-N1-*303 is selected.3.When connecting the rotating shaft to other parts, please ensure a tight fit between them.
Without a tight fit, the lid will not slow down properly when closing. The corresponding
dimensions for fixing the rotating shaft and the main body are as follows.link:http://www.toyoudamper.com/rotary-damper/vane-damper/slow-close-damper-soft-close-toilet-seat-dampe.html