Motherboard Repair Equipment with Infrared Heating

Model Number: BGA IRDA Welder T-870A Brand Name: Puhui Key Specifications/Special Features: Instructions:First step:According to PCB big and small, reconciliation PCB plate space between the unsolder BGA have to face top red light, let facula cover CMOS chip Reconciliation light and sensor high in order to keep from CMOS chip to light about 20mm Sensor's warm just touch CMOS chip or side so to keep warm exactly Will be used syringes to inject liquid flux demolition welding at the bottom of the chip Welding can also help prevent loss padSecond step:The warm-up plate's warm up sensing head, put on the PCB's weld plate hole or sheet copper, not on the board which is below the top Al stint, because affect warmThird step:

Enactment warm-up warm, generally the plum-bum enactment 100°, no plum-bum enactment 120°

Turn on warm-up on-off, 3 to 5 minutes

Don't rise temperate too quickly, which results in components falling at the bottom

Fourth step:

• Using 936 iron and suck tin line clean weld plate after, smear a little liquid flux in order to spare wheel

Technical parameters:

• Working floor size: 360 x 240mm
• Rated voltage and frequency: 220 to 230V AC, 60/50Hz
• Complete machine power: 220/1,000 to 110V/1,200W
• Infrared lamp body power: 150W
• Preheating chassis power: 800W
• Infrared lamp body heating size: 70mm (50 x 50mm)
• Preheating chassis preheating size: 240 x 180mm Infrared lamp body temperature (adjustable): 200 to 350°C
• Preheating chassis temperature (adjustable): 60 to 200°C

Instrument inventory:

• Welding table main body: 1 Infrared lamp body: 1 Temperature sensor: 1 Board support of the circuit: 1 Power line: 1 User's manual (compact disc): 1